top of page

Kulicke & Soffa Legacy Manual Wire Bonder

Legacy Manual Wire Bonder
K&S 41XX, 4500 & 4700

Do you operate an older Kulicke & Soffa (K&S) manual wire bonder?​

​

For systems from the K&S 4500 Series and the 4700 Convertible Series, TA.TEC can assess current serviceability and spare parts availability. For earlier 41XX models, we can review possible successor and trade-in options.​

K&S Legacy Manual Wire Bonders at a Glance

The following models belong to earlier K&S manual wire bonder platforms. The available technical support depends on the respective series.

K&S 4500 Series & 4700 Convertible Series

MODEL

BOND METHOD

CONTROL

K&S 4522

Ball-Wedge

Analog

K&S 4524AD

Ball-Wedge

Digital

K&S 4526

Wedge-Wedge

Analog

K&S 4523AD

Wedge-Wedge

Digital

K&S 4700

Ball-Wedge / Wedge-Wedge

Analog

K&S 4700AD

Ball-Wedge / Wedge-Wedge

Programmable digital

For the K&S 4500/4700 systems listed above, TA.TEC can individually assess current serviceability and spare parts availability.

Earlier K&S 41XX Legacy Models

MODEL

BOND METHOD

K&S 4123/6

Wedge-Wedge

K&S 4124

Ball-Wedge

TA.TEC does not provide legacy repair or spare parts supply for the 41XX systems listed above. However, possible successor and trade-in options can be reviewed.

Technical Assessment for K&S 4500/4700

For older K&S 4500/4700 systems, the technically appropriate approach depends on the machine condition, the specific issue and the availability of required components. Due to the legacy status of these systems, repair options or spare parts availability cannot be generally guaranteed.

Assess Serviceability

In the event of a technical issue, we first assess the machine and the reported problem to determine which type of technical support is appropriate and feasible.

Check Spare Parts Availability

Required components are checked individually for the specific machine. A part number is helpful if available.

For an initial assessment, we require:

Model | Serial number | Machine status | Issue or required spare part | Part number, if available | Machine location

History & End-of-Life

2012 – iBOND5000 Introduced

K&S introduces the iBOND5000 Series as the next generation of manual wire bonders based on the 4500 platform.

 

2013 – 4500/4700 Discontinued

Production and sales of the manual K&S 4500 and 4700 systems end on December 30, 2013.

 

2016 – Manual Wire Bonder Product Line at Micro Point Pro (MPP)

MPP takes over the manual wire bonder product line and continues it.

 

2018 – Legacy Support Period

The stated minimum period for spare parts support for the discontinued systems runs until December 30, 2018, subject to the availability of parts or suitable substitutes.

 

Today – iBOND5000 at MPP

The manual wire bonder product line is currently continued by MPP.

 

​K&S is the original manufacturer of the legacy systems referenced on this page and introduced the iBOND5000 in 2012. The manual wire bonder product line is now continued by MPP. TA.TEC is the MPP contact for Germany, Austria and Switzerland.

MPP-Logo_edited.png

Successor & Trade-in

iBOND5000

The current MPP manual wire bonder family is available in three configurations:

BALL | WEDGE | DUAL

Trade-in

For existing manual wire bonders, trade-in eligibility can be assessed based on manufacturer, model, year of manufacture and machine condition.

Frequently asked questions

Historical product information is based on published K&S documentation relating to the iBOND5000 and 4500 Series, as well as MPP documentation concerning the end-of-life of the K&S 4500 and 4700 systems.

K&S and Kulicke & Soffa are mentioned solely for the purpose of identifying the relevant legacy products. TA.TEC Consulting GmbH is not an authorized K&S partner or K&S service provider.

bottom of page